"NIBBIO” stainless steel tangential cage holding 3 Dadant deep frames or 6 Dadant super frames and suitable for Ø 520mm tanks. It is fitted with a Ø 14mm centre shaft hole, screens size 345x390mm.
"NIBBIO” stainless steel tangential cage holding 3 Dadant deep frames or 6 Dadant super frames and suitable for Ø 520mm tanks. It is fitted with a Ø 14mm centre shaft hole, screens size 345x390mm.
"NIBBIO” stainless steel tangential cage holding 3 Dadant deep frames or 6 Dadant super frames and suitable for Ø 520mm tanks. It is fitted with a Ø 14mm centre shaft hole, screens size 345x390mm.
With nylon basket for 9 super frames or 3 DADANT nest frames Nylon conical transmission - Total discharge bottom Ø 520 mm - 40 mm plastic cut tap N° 3 removable painted legs and hinged transparent lid For the nest frames you need the complementary panels (Cod. LA 4790) NOT INCLUDED
With nylon basket for 9 super frames or 3 DADANT nest frames Nylon conical transmission - Total discharge bottom Ø 520 mm - 40 mm plastic cut tap N° 3 removable painted legs and hinged transparent lid For the nest frames you need the complementary panels (Cod. LA 4790) NOT INCLUDED
With nylon basket for 9 super frames or 3 DADANT nest frames Nylon conical transmission - Total discharge bottom Ø 520 mm - 40 mm plastic cut tap N° 3 removable painted legs and hinged transparent lid For the nest frames you need the complementary panels (Cod. LA 4790) NOT INCLUDED
With stainless steel basket for 9 honeycombs from the super or 3 from the DADANT nest Nylon conical transmission - Total discharge bottom Ø 520 mm - 40 mm plastic cut tap N° 3 removable painted legs and hinged transparent lid For nest frames you need the supplementary panels (Cod. LA 4790) NOT INCLUDED
With stainless steel basket for 9 honeycombs from the super or 3 from the DADANT nest Nylon conical transmission - Total discharge bottom Ø 520 mm - 40 mm plastic cut tap N° 3 removable painted legs and hinged transparent lid For nest frames you need the supplementary panels (Cod. LA 4790) NOT INCLUDED
With stainless steel basket for 9 honeycombs from the super or 3 from the DADANT nest Nylon conical transmission - Total discharge bottom Ø 520 mm - 40 mm plastic cut tap N° 3 removable painted legs and hinged transparent lid For nest frames you need the supplementary panels (Cod. LA 4790) NOT INCLUDED
“RADIALNOVE” stainless steel radial cage easy-loading version, holding 9 Dadant super frames an suitable for Ø 520mm tanks. It is fitted with a Ø 14mm centre shaft hole.
“RADIALNOVE” stainless steel radial cage easy-loading version, holding 9 Dadant super frames an suitable for Ø 520mm tanks. It is fitted with a Ø 14mm centre shaft hole.
“RADIALNOVE” stainless steel radial cage easy-loading version, holding 9 Dadant super frames an suitable for Ø 520mm tanks. It is fitted with a Ø 14mm centre shaft hole.
Radial motorized honey extractor RADIAL 9, Ø 520 mm, with plastic cage for 9 Dadant super frames, with low voltage Range 2 electric motor. Fixed under the vat, with the possibility of regulation between 0 and 460 RPM. Equipped with a new instant release device. Ø 40 mm plastic tap and 3 solid steel legs. For nest frames you need the supplementary panels (Cod. LA 4790) NOT INCLUDED
Radial motorized honey extractor RADIAL 9, Ø 520 mm, with plastic cage for 9 Dadant super frames, with low voltage Range 2 electric motor. Fixed under the vat, with the possibility of regulation between 0 and 460 RPM. Equipped with a new instant release device. Ø 40 mm plastic tap and 3 solid steel legs. For nest frames you need the supplementary panels (Cod. LA 4790) NOT INCLUDED
Radial motorized honey extractor RADIAL 9, Ø 520 mm, with plastic cage for 9 Dadant super frames, with low voltage Range 2 electric motor. Fixed under the vat, with the possibility of regulation between 0 and 460 RPM. Equipped with a new instant release device. Ø 40 mm plastic tap and 3 solid steel legs. For nest frames you need the supplementary panels (Cod. LA 4790) NOT INCLUDED
Toothed Nylon Joint Sleeve diameter ø 12mm with Threaded Hole and Grub screw.ELOBA motorization accessory(The photo shows the measurement using a caliper, not included)
Toothed Nylon Joint Sleeve diameter ø 12mm with Threaded Hole and Grub screw.ELOBA motorization accessory(The photo shows the measurement using a caliper, not included)
Toothed Nylon Joint Sleeve diameter ø 12mm with Threaded Hole and Grub screw.ELOBA motorization accessory(The photo shows the measurement using a caliper, not included)
NYLON BASKET for RADIALNOVE D.B. honey extractor of 9 super frames or 3 nest frames - Honey extractor diameter 520 mm - pin hole diameter 14 mm
NYLON BASKET for RADIALNOVE D.B. honey extractor of 9 super frames or 3 nest frames - Honey extractor diameter 520 mm - pin hole diameter 14 mm
NYLON BASKET for RADIALNOVE D.B. honey extractor of 9 super frames or 3 nest frames - Honey extractor diameter 520 mm - pin hole diameter 14 mm
NYLON CONICAL GEAR TRANSMISSION for HONEY EXTRACTOR Diam.: 520 mm (LEGA ITALY or SIMILAR)
Including pair of bevel gears in nylon diam. 85mm
With 14 mm diameter rod and 520 mm bar
NYLON CONICAL GEAR TRANSMISSION for HONEY EXTRACTOR Diam.: 520 mm (LEGA ITALY or SIMILAR)
Including pair of bevel gears in nylon diam. 85mm
With 14 mm diameter rod and 520 mm bar
NYLON CONICAL GEAR TRANSMISSION for HONEY EXTRACTOR Diam.: 520 mm (LEGA ITALY or SIMILAR)
Including pair of bevel gears in nylon diam. 85mm
With 14 mm diameter rod and 520 mm bar
FLAMINGO motorized radial honey extractor, Ø 700 mm, with stainless steel cage for 28 Dadant super frames or 12 Langstroth frames. With low voltage RANGE 2 ELECTRIC MOTOR. Fixed under the vat, with the possibility of regulation between 0 and 460 RPM. Equipped with a new instant release device. Ø 40 mm nylon tap and 3 solid steel legs.
FLAMINGO motorized radial honey extractor, Ø 700 mm, with stainless steel cage for 28 Dadant super frames or 12 Langstroth frames. With low voltage RANGE 2 ELECTRIC MOTOR. Fixed under the vat, with the possibility of regulation between 0 and 460 RPM. Equipped with a new instant release device. Ø 40 mm nylon tap and 3 solid steel legs.
FLAMINGO motorized radial honey extractor, Ø 700 mm, with stainless steel cage for 28 Dadant super frames or 12 Langstroth frames. With low voltage RANGE 2 ELECTRIC MOTOR. Fixed under the vat, with the possibility of regulation between 0 and 460 RPM. Equipped with a new instant release device. Ø 40 mm nylon tap and 3 solid steel legs.
• For each selected program the cycle time set is the real time of the work cycle, the times necessary to execute the acceleration and deceleration ramps are not considered, in these periods the time counter stops.
• The stainless steel cage is laser cut and designed to hold 36 super frames Dadant.
• The stainless steel container has a diameter of Ø 850 mm, the upper edge is rolled up to obtain greater axial rigidity and the bottom has a particular double conic shape that collects the honey towards the tap.
The AIRONE professional honey extractor is designed to last over time and to guarantee reliability and stability.
The vat and the cage are in stainless steel, as required by the legislation on materials in contact with honey.
No limit to the number of frames to be honey extracted, Lega honey extractors will accompany you over time, as only a quality product can do.
The extractor is MADE IN ITALY, which means that it has been designed and built within the Lega factory, with all the experience and quality that has always characterized us.
ADVANTAGES:
- Professional use
- Programmable with 6 work phases
- Food grade stainless steel AISI 304
- CE marking
- Made in Italy
- Stability and strength thanks to the steel legs
- Easy to clean
- Easy to use
TECHNICAL DATA:
Vat Material: Stainless Steel
Cage Material: Stainless Steel
Vat diameter: Ø 85cm
Cage diameter: Ø 77.7cm
Cage: radial
Maximum rotation speed: 400 rpm
Loading height: 1080mm
Height of drain: 350mm
Total height: 1280mm
Weight: 88kg
Frame type: Dadant Super
Capacity: 36 frames
• For each selected program the cycle time set is the real time of the work cycle, the times necessary to execute the acceleration and deceleration ramps are not considered, in these periods the time counter stops.
• The stainless steel cage is laser cut and designed to hold 36 super frames Dadant.
• The stainless steel container has a diameter of Ø 850 mm, the upper edge is rolled up to obtain greater axial rigidity and the bottom has a particular double conic shape that collects the honey towards the tap.
The AIRONE professional honey extractor is designed to last over time and to guarantee reliability and stability.
The vat and the cage are in stainless steel, as required by the legislation on materials in contact with honey.
No limit to the number of frames to be honey extracted, Lega honey extractors will accompany you over time, as only a quality product can do.
The extractor is MADE IN ITALY, which means that it has been designed and built within the Lega factory, with all the experience and quality that has always characterized us.
ADVANTAGES:
- Professional use
- Programmable with 6 work phases
- Food grade stainless steel AISI 304
- CE marking
- Made in Italy
- Stability and strength thanks to the steel legs
- Easy to clean
- Easy to use
TECHNICAL DATA:
Vat Material: Stainless Steel
Cage Material: Stainless Steel
Vat diameter: Ø 85cm
Cage diameter: Ø 77.7cm
Cage: radial
Maximum rotation speed: 400 rpm
Loading height: 1080mm
Height of drain: 350mm
Total height: 1280mm
Weight: 88kg
Frame type: Dadant Super
Capacity: 36 frames
Continuous improvement has always guided our research and our production. An improvement that has led to equip our PROFESSIONAL HONEY EXTRACTORS with the new RD2 system:
• 1.3 kW three-phase electric motor powered single-phase, with integrated inverter in the lower area of the honey extractor.
• Small low voltage (24V) control panel also complies with the American ULCSA standards.
• Positioning of the side control panel on the beam for better accessibility.
• In addition to the functions of the previous system that remain unchanged, the possibility of having a user-programmable cycle of up to 6 work phases has been added, in which the rotation speed of the stand and its rotation speed can be set for each of these directions of rotation (clockwise / anticlockwise). The total cycle time set is automatically divided equally for each phase making up the work cycle.
Continuous improvement has always guided our research and our production. An improvement that has led to equip our PROFESSIONAL HONEY EXTRACTORS with the new RD2 system:
• 1.3 kW three-phase electric motor powered single-phase, with integrated inverter in the lower area of the honey extractor.
• Small low voltage (24V) control panel also complies with the American ULCSA standards.
• Positioning of the side control panel on the beam for better accessibility.
• In addition to the functions of the previous system that remain unchanged, the possibility of having a user-programmable cycle of up to 6 work phases has been added, in which the rotation speed of the stand and its rotation speed can be set for each of these directions of rotation (clockwise / anticlockwise). The total cycle time set is automatically divided equally for each phase making up the work cycle.
Continuous improvement has always guided our research and our production. An improvement that has led to equip our PROFESSIONAL HONEY EXTRACTORS with the new RD2 system:
• 1.3 kW three-phase electric motor powered single-phase, with integrated inverter in the lower area of the honey extractor.
• Small low voltage (24V) control panel also complies with the American ULCSA standards.
• Positioning of the side control panel on the beam for better accessibility.
• In addition to the functions of the previous system that remain unchanged, the possibility of having a user-programmable cycle of up to 6 work phases has been added, in which the rotation speed of the stand and its rotation speed can be set for each of these directions of rotation (clockwise / anticlockwise). The total cycle time set is automatically divided equally for each phase making up the work cycle.
Helical gear drive with freewheel and brake. It is supplied complete with casing, top bar and Ø 14mm, 510mm long centre shaft, suitable for Ø 520mm honey extractors. It is easily installed in place of conical gears.
Helical gear drive with freewheel and brake. It is supplied complete with casing, top bar and Ø 14mm, 510mm long centre shaft, suitable for Ø 520mm honey extractors. It is easily installed in place of conical gears.
Helical gear drive with freewheel and brake. It is supplied complete with casing, top bar and Ø 14mm, 510mm long centre shaft, suitable for Ø 520mm honey extractors. It is easily installed in place of conical gears.
• For each selected program the cycle time set is the real time of the work cycle, the times necessary to execute the acceleration and deceleration ramps are not considered, in these periods the time counter stops.
• The stainless steel container has a diameter of Ø 990 mm, the upper edge is rolled up to obtain greater axial rigidity and the bottom has a particular double conic shape that collects the honey towards the tap.
The AIRONE professional honey extractor is designed to last over time and to guarantee reliability and stability.
The vat and the cage are in stainless steel, as required by the legislation on materials in contact with honey.
No limit to the number of frames to be honey extracted, Lega honey extractors will accompany you over time, as only a quality product can do.
The extractor is MADE IN ITALY, which means that it has been designed and built within the Lega factory, with all the experience and quality that has always characterized us.
ADVANTAGES:
- Professional use
- Programmable with 6 work phases
- Food grade stainless steel AISI 304
- CE marking
- Made in Italy
- Stability and strength thanks to the steel legs
- Easy to clean
- Easy to use
TECHNICAL DATA:
Vat Material: Stainless Steel
Cage Material: Stainless Steel
Vat diameter: Ø 99cm
Cage: radial
Maximum rotation speed: 400 rpm
Type of Hives: Dadant Super/Dadant Brood/Langstroth/Zander
Capacity:
42 Dadant super frames
18 Dadant Brood frames
42 Langstroth frames
42 Zander frames
• For each selected program the cycle time set is the real time of the work cycle, the times necessary to execute the acceleration and deceleration ramps are not considered, in these periods the time counter stops.
• The stainless steel container has a diameter of Ø 990 mm, the upper edge is rolled up to obtain greater axial rigidity and the bottom has a particular double conic shape that collects the honey towards the tap.
The AIRONE professional honey extractor is designed to last over time and to guarantee reliability and stability.
The vat and the cage are in stainless steel, as required by the legislation on materials in contact with honey.
No limit to the number of frames to be honey extracted, Lega honey extractors will accompany you over time, as only a quality product can do.
The extractor is MADE IN ITALY, which means that it has been designed and built within the Lega factory, with all the experience and quality that has always characterized us.
ADVANTAGES:
- Professional use
- Programmable with 6 work phases
- Food grade stainless steel AISI 304
- CE marking
- Made in Italy
- Stability and strength thanks to the steel legs
- Easy to clean
- Easy to use
TECHNICAL DATA:
Vat Material: Stainless Steel
Cage Material: Stainless Steel
Vat diameter: Ø 99cm
Cage: radial
Maximum rotation speed: 400 rpm
Type of Hives: Dadant Super/Dadant Brood/Langstroth/Zander
Capacity:
42 Dadant super frames
18 Dadant Brood frames
42 Langstroth frames
42 Zander frames
Continuous improvement has always guided our research and our production. An improvement that has led to equip our PROFESSIONAL HONEY EXTRACTORS with the new RD2 system:
• 1.3 kW three-phase electric motor powered single-phase, with integrated inverter in the lower area of the honey extractor.
• Small low voltage (24V) control panel also complies with the American ULCSA standards.
• Positioning of the side control panel on the beam for better accessibility.
• In addition to the functions of the previous system that remain unchanged, the possibility of having a user-programmable cycle of up to 6 work phases has been added, in which the rotation speed of the stand and its rotation speed can be set for each of these directions of rotation (clockwise / anticlockwise). The total cycle time set is automatically divided equally for each phase making up the work cycle.
Continuous improvement has always guided our research and our production. An improvement that has led to equip our PROFESSIONAL HONEY EXTRACTORS with the new RD2 system:
• 1.3 kW three-phase electric motor powered single-phase, with integrated inverter in the lower area of the honey extractor.
• Small low voltage (24V) control panel also complies with the American ULCSA standards.
• Positioning of the side control panel on the beam for better accessibility.
• In addition to the functions of the previous system that remain unchanged, the possibility of having a user-programmable cycle of up to 6 work phases has been added, in which the rotation speed of the stand and its rotation speed can be set for each of these directions of rotation (clockwise / anticlockwise). The total cycle time set is automatically divided equally for each phase making up the work cycle.
Continuous improvement has always guided our research and our production. An improvement that has led to equip our PROFESSIONAL HONEY EXTRACTORS with the new RD2 system:
• 1.3 kW three-phase electric motor powered single-phase, with integrated inverter in the lower area of the honey extractor.
• Small low voltage (24V) control panel also complies with the American ULCSA standards.
• Positioning of the side control panel on the beam for better accessibility.
• In addition to the functions of the previous system that remain unchanged, the possibility of having a user-programmable cycle of up to 6 work phases has been added, in which the rotation speed of the stand and its rotation speed can be set for each of these directions of rotation (clockwise / anticlockwise). The total cycle time set is automatically divided equally for each phase making up the work cycle.
- Sale
- Sale
- Sale
Helical gear drive with freewheel and brake. It is supplied complete with casing, top bar and Ø 14mm, 506 mm long centre shaft, suitable for Ø 630 mm honey extractors. It is easily installed in place of conical gears.
Helical gear drive with freewheel and brake. It is supplied complete with casing, top bar and Ø 14mm, 506 mm long centre shaft, suitable for Ø 630 mm honey extractors. It is easily installed in place of conical gears.
Helical gear drive with freewheel and brake. It is supplied complete with casing, top bar and Ø 14mm, 506 mm long centre shaft, suitable for Ø 630 mm honey extractors. It is easily installed in place of conical gears.
- Sale
RADIAL STAINLESS STEEL BASKET for "TUCANO" honey extractor for 20 super frames or 3 DADANT nest frames - Honey extractor diameter 620 mm - hole for pin diameter 14 mm Dim.: Diameter 57 cm - Height 39 cm
- Sale
RADIAL STAINLESS STEEL BASKET for "TUCANO" honey extractor for 20 super frames or 3 DADANT nest frames - Honey extractor diameter 620 mm - hole for pin diameter 14 mm Dim.: Diameter 57 cm - Height 39 cm
- Sale
RADIAL STAINLESS STEEL BASKET for "TUCANO" honey extractor for 20 super frames or 3 DADANT nest frames - Honey extractor diameter 620 mm - hole for pin diameter 14 mm Dim.: Diameter 57 cm - Height 39 cm
• For each selected program the cycle time set is the real time of the work cycle, the times necessary to execute the acceleration and deceleration ramps are not considered, in these periods the time counter stops.
• The stainless steel container has a diameter of Ø 850 mm, the upper edge is rolled up to obtain greater axial rigidity and the bottom has a particular double conic shape that collects the honey towards the tap.
The AIRONE professional honey extractor is designed to last over time and to guarantee reliability and stability.
The vat and the cage are in stainless steel, as required by the legislation on materials in contact with honey.
No limit to the number of frames to be honey extracted, Lega honey extractors will accompany you over time, as only a quality product can do.
The extractor is MADE IN ITALY, which means that it has been designed and built within the Lega factory, with all the experience and quality that has always characterized us.
ADVANTAGES:
- Professional use
- Programmable with 6 work phases
- Food grade stainless steel AISI 304
- CE marking
- Made in Italy
- Stability and strength thanks to the steel legs
- Easy to clean
- Easy to use
TECHNICAL DATA:
Vat Material: Stainless Steel
Cage Material: Stainless Steel
Vat diameter: Ø 85 cm
Cage: radial
Maximum rotation speed: 400 rpm
Type of Hives: Dadant Super/Dadant Brood/Langstroth/Zander
Capacity:
20 Dadant super frames
20 Langstroth frames
20 Zander frames
• For each selected program the cycle time set is the real time of the work cycle, the times necessary to execute the acceleration and deceleration ramps are not considered, in these periods the time counter stops.
• The stainless steel container has a diameter of Ø 850 mm, the upper edge is rolled up to obtain greater axial rigidity and the bottom has a particular double conic shape that collects the honey towards the tap.
The AIRONE professional honey extractor is designed to last over time and to guarantee reliability and stability.
The vat and the cage are in stainless steel, as required by the legislation on materials in contact with honey.
No limit to the number of frames to be honey extracted, Lega honey extractors will accompany you over time, as only a quality product can do.
The extractor is MADE IN ITALY, which means that it has been designed and built within the Lega factory, with all the experience and quality that has always characterized us.
ADVANTAGES:
- Professional use
- Programmable with 6 work phases
- Food grade stainless steel AISI 304
- CE marking
- Made in Italy
- Stability and strength thanks to the steel legs
- Easy to clean
- Easy to use
TECHNICAL DATA:
Vat Material: Stainless Steel
Cage Material: Stainless Steel
Vat diameter: Ø 85 cm
Cage: radial
Maximum rotation speed: 400 rpm
Type of Hives: Dadant Super/Dadant Brood/Langstroth/Zander
Capacity:
20 Dadant super frames
20 Langstroth frames
20 Zander frames
Continuous improvement has always guided our research and our production. An improvement that has led to equip our PROFESSIONAL HONEY EXTRACTORS with the new RD2 system:
• 1.3 kW three-phase electric motor powered single-phase, with integrated inverter in the lower area of the honey extractor.
• Small low voltage (24V) control panel also complies with the American ULCSA standards.
• Positioning of the side control panel on the beam for better accessibility.
• In addition to the functions of the previous system that remain unchanged, the possibility of having a user-programmable cycle of up to 6 work phases has been added, in which the rotation speed of the stand and its rotation speed can be set for each of these directions of rotation (clockwise / anticlockwise). The total cycle time set is automatically divided equally for each phase making up the work cycle.
Continuous improvement has always guided our research and our production. An improvement that has led to equip our PROFESSIONAL HONEY EXTRACTORS with the new RD2 system:
• 1.3 kW three-phase electric motor powered single-phase, with integrated inverter in the lower area of the honey extractor.
• Small low voltage (24V) control panel also complies with the American ULCSA standards.
• Positioning of the side control panel on the beam for better accessibility.
• In addition to the functions of the previous system that remain unchanged, the possibility of having a user-programmable cycle of up to 6 work phases has been added, in which the rotation speed of the stand and its rotation speed can be set for each of these directions of rotation (clockwise / anticlockwise). The total cycle time set is automatically divided equally for each phase making up the work cycle.
Continuous improvement has always guided our research and our production. An improvement that has led to equip our PROFESSIONAL HONEY EXTRACTORS with the new RD2 system:
• 1.3 kW three-phase electric motor powered single-phase, with integrated inverter in the lower area of the honey extractor.
• Small low voltage (24V) control panel also complies with the American ULCSA standards.
• Positioning of the side control panel on the beam for better accessibility.
• In addition to the functions of the previous system that remain unchanged, the possibility of having a user-programmable cycle of up to 6 work phases has been added, in which the rotation speed of the stand and its rotation speed can be set for each of these directions of rotation (clockwise / anticlockwise). The total cycle time set is automatically divided equally for each phase making up the work cycle.
CHROME-PLATED ADDITIONAL PANELS for RADIALNOVE and TUCANO HONEY EXTRACTOR (ALLOY) - to extract nest frames, they are placed tangentially
CHROME-PLATED ADDITIONAL PANELS for RADIALNOVE and TUCANO HONEY EXTRACTOR (ALLOY) - to extract nest frames, they are placed tangentially
CHROME-PLATED ADDITIONAL PANELS for RADIALNOVE and TUCANO HONEY EXTRACTOR (ALLOY) - to extract nest frames, they are placed tangentially
Conical gear drive diam. 85mm, plastic, only wheels
DIAMETERSExternal diameter ø of the crown 85 mmDiameter ø central pin 12mm
Conical gear drive diam. 85mm, plastic, only wheels
DIAMETERSExternal diameter ø of the crown 85 mmDiameter ø central pin 12mm
Conical gear drive diam. 85mm, plastic, only wheels
DIAMETERSExternal diameter ø of the crown 85 mmDiameter ø central pin 12mm
Conical gear drive diam. 85mm, plastic, only wheels
DIAMETERSExternal diameter ø of the crown 85 mmDiameter ø central pin 12mm
Conical gear drive diam. 85mm, plastic, only wheels
DIAMETERSExternal diameter ø of the crown 85 mmDiameter ø central pin 12mm
Conical gear drive diam. 85mm, plastic, only wheels
DIAMETERSExternal diameter ø of the crown 85 mmDiameter ø central pin 12mm
CENTRAL PIN for CONICAL ALLOY EXTRACTOR BASKET Length : 561 mm Diameter : 14 mm
CENTRAL PIN for CONICAL ALLOY EXTRACTOR BASKET Length : 561 mm Diameter : 14 mm
CENTRAL PIN for CONICAL ALLOY EXTRACTOR BASKET Length : 561 mm Diameter : 14 mm
Toothed Nylon Joint Sleeve diameter ø 12mm with Threaded Hole and Grub screw.ELOBA motorization accessory(The photo shows the measurement using a caliper, not included)
Toothed Nylon Joint Sleeve diameter ø 12mm with Threaded Hole and Grub screw.ELOBA motorization accessory(The photo shows the measurement using a caliper, not included)
Toothed Nylon Joint Sleeve diameter ø 12mm with Threaded Hole and Grub screw.ELOBA motorization accessory(The photo shows the measurement using a caliper, not included)
Basket in NYLON NET for centrifugation of OPERCOLI for D.B. honey extractors and Langstroth, to be inserted in the tangential cages of the honey extractors Size: 25 x 37cm
Basket in NYLON NET for centrifugation of OPERCOLI for D.B. honey extractors and Langstroth, to be inserted in the tangential cages of the honey extractors Size: 25 x 37cm
Basket in NYLON NET for centrifugation of OPERCOLI for D.B. honey extractors and Langstroth, to be inserted in the tangential cages of the honey extractors Size: 25 x 37cm
Toothed Nylon Joint, Hub diameter ø 14mm with Threaded Hole and Grub screw.ELOBA motorization accessory(The photo shows the measurement using a caliper, not included)
Toothed Nylon Joint, Hub diameter ø 14mm with Threaded Hole and Grub screw.ELOBA motorization accessory(The photo shows the measurement using a caliper, not included)
Toothed Nylon Joint, Hub diameter ø 14mm with Threaded Hole and Grub screw.ELOBA motorization accessory(The photo shows the measurement using a caliper, not included)
Central bushing 1/2" in stainless steel for motorized honey extractors - complete
Central bushing 1/2" in stainless steel for motorized honey extractors - complete
Central bushing 1/2" in stainless steel for motorized honey extractors - complete
Nylon central bushing for manual extractor - complete
Nylon central bushing for manual extractor - complete
Clear polycarbonate lids with hinges for diam. 520 mm honey extractors TANK: Ø520mm LID: Ø545mm
Clear polycarbonate lids with hinges for diam. 520 mm honey extractors TANK: Ø520mm LID: Ø545mm
Clear polycarbonate lids with hinges for diam. 520 mm honey extractors TANK: Ø520mm LID: Ø545mm
HALF-COVER in transparent polycarbonate, for LEGA honey extractor (Radialnove and Nibbio) - Ø 520 mm 1 single piece without hinges (for the pair order 2 pieces)
HALF-COVER in transparent polycarbonate, for LEGA honey extractor (Radialnove and Nibbio) - Ø 520 mm 1 single piece without hinges (for the pair order 2 pieces)
HALF-COVER in transparent polycarbonate, for LEGA honey extractor (Radialnove and Nibbio) - Ø 520 mm 1 single piece without hinges (for the pair order 2 pieces)
Clear polycarbonate lids with hinges for diam. 630 mm honey extractors
TANK: Ø 630 mm
LID: Ø 655 mm
Clear polycarbonate lids with hinges for diam. 630 mm honey extractors
TANK: Ø 630 mm
LID: Ø 655 mm
Clear polycarbonate lids with hinges for diam. 630 mm honey extractors
TANK: Ø 630 mm
LID: Ø 655 mm
Self-balancing kit for honey extractors, with 3 special wheels to be fixed to the feet of your electric honey extractor - M8
Self-balancing kit for honey extractors, with 3 special wheels to be fixed to the feet of your electric honey extractor - M8
Self-balancing kit for honey extractors, with 3 special wheels to be fixed to the feet of your electric honey extractor - M8
